How To Change A Light Globe

If you want to change a light globe, but you have no idea where to start, you are absolutely going to love this article. I am going to go over the steps that will help you change a light globe in no time flat. By the end of this article, you will be able to change a light globe in a time efficient manner and you will be able to do it safely. These steps will be very easy to follow and by the time you are finished with them, you will have a brand new light globe installed in a lighting fixture.

Step 1

Take a good look at the light fixture that you would like to install the light globe into. If there is not already a light globe in the fixture, you will want to get a light globe of the proper wattage to put into the fixture.

How To Change A Light Globe

Step 2

Turn off the light globe switch. This switch is commonly found on a wall. That way, you won’t get electrocuted when you are installing the light globe.

Step 3

If you are replacing a light globe that has stopped working, you will want to make sure the light globe has been turned off for at least 30 seconds. This will give the light globe enough time to cool down, so you don’t burn your fingers or hand when unscrewing the light globe.

Step 4

After you have let the light globe cool down, you will want to unscrew it from the fixture slowly. After you have unscrewed the light globe from the fixture, you will want to dispose of it.

Step 5

Now it’s time to screw in the new light globe into the fixture. When screwing in the new light globe, you will want to screw it in slowly and gently. It is very important that you do not screw it in too tightly or else you could damage the threads on the light globe or possibly even break it.

Step 6

Now it’s time for you to turn on the light switch on the wall. That way, you can make sure that the light globe is functioning properly. If it’s not, you may want to make sure the light globe you installed was new and that it wasn’t damaged. Also, make sure you have it screwed in all the way, but not too tightly.

Step 7

If the globe is not working that you’ve installed, you will want to go over all of the steps above and replace the bulb. Once again, make sure you turn off the light switch before checking the globe. That way, you won’t get shocked and it will also allow the globe to cool down, so you can touch it with your hands without getting burned.

So, now you know how to change a light globe in your own home or you may hire a light globe replacement service provider. It’s not very difficult to do, but you do have to be careful. Always handle glass gently and remember that it gets hot very quickly, so always give your light globes time to cool off before touching them.

Leave a Reply